| 當前位置：首頁->技術分享 |
|
| STM32F415ZG 雙馬達磁場定向控制(FOC)開發方案 |
|
|
| 文章來源： 更新時間：2014/4/14 14:35:00 |
在線咨詢： |
| |
ST公司的STM32F415xx和STM32F417xx系列是基于高性能ARM®Cortex™-M4 32位RISC核的32位MCU,工作頻率高達168MHz,具有210 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1)性能和DSP指令,多達1MB閃存/192+4KB RAM,加密, USB OTG HS/FS，以太網等.主要用在馬車驅動和控制,醫療設備,工業設備如PLC,逆變器,打印機和掃描儀,家庭音頻設備以及HVAC和視頻連接等.本文介紹了STM32F41x 系列主要特性和框圖, 演示板STEVAL-IHM039V1主要特性,電路圖和材料清單.
The STM32F415xx and STM32F417xx family is based on the high-performance ARM®Cortex™-M4 32-bit RISC core operating at a frequency of up to 168 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all ARM singleprecision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security. The Cortex-M4 core with FPU will be referred to as Cortex-M4F throughout this document.
The STM32F415xx and STM32F417xx family incorporates high-speed embedded memories (Flash memory up to 1 Mbyte, up to 192 Kbytes of SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix.
All devices offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers, a true random number generator (RNG), and a cryptographic acceleration cell. They also feature standard and advanced communication interfaces.
• Up to three I2Cs
• Three SPIs, two I2Ss full duplex. To achieve audio class accuracy, the I2S peripherals can be clocked via a dedicated internal audio PLL or via an external clock to allow synchronization.
• Four USARTs plus two UARTs
• An USB OTG full-speed and a USB OTG high-speed with full-speed capability (with the ULPI),
• Two CANs
• An SDIO/MMC interface
• Ethernet and the camera interface available on STM32F417xx devices only.
New advanced peripherals include an SDIO, an enhanced flexible static memory control (FSMC) interface (for devices offered in packages of 100 pins and more), a camera interface for CMOS sensors and a cryptographic acceleration cell.
The STM32F415xx and STM32F417xx family operates in the –40 to +105 ℃ temperature range from a 1.8 to 3.6 V power supply. The supply voltage can drop to 1.7 V when the device operates in the 0 to 70 ℃ temperature range using an external power supply supervisor. A comprehensive set of power-saving mode allows the design of low-power applications.
The STM32F415xx and STM32F417xx family offers devices in various packages ranging from 64 pins to 176 pins. The set of included peripherals changes with the device chosen.
STM32F41x 系列主要特性:
• Core: ARM 32-bit Cortex™-M4 CPU with FPU, Adaptive real-time accelerator (ART ccelerator™) allowing 0-wait state execution from Flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
• Memories
– Up to 1 Mbyte of Flash memory
– Up to 192+4 Kbytes of SRAM including 64-Kbyte of CCM (core coupled memory) data
RAM
– Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memories
• LCD parallel interface, 8080/6800 modes
• Clock, reset and supply management
– 1.8 V to 3.6 V application supply and I/Os
– POR, PDR, PVD and BOR
– 4-to-26 MHz crystal oscillator
– Internal 16 MHz factory-trimmed RC (1% accuracy)
– 32 kHz oscillator for RTC with calibration
– Internal 32 kHz RC with calibration
• Low power
– Sleep, Stop and Standby modes
– VBAT supply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM
• 3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved
mode
• 2×12-bit D/A converters
• General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
• Up to 17 timers: up to twelve 16-bit and two 32- bit timers up to 168 MHz, each with up to 4
IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
• Debug mode
– Serial wire debug (SWD) & JTAG interfaces
– Cortex-M4 Embedded Trace Macrocell™
• Up to 140 I/O ports with interrupt capability
– Up to 136 fast I/Os up to 84 MHz
– Up to 138 5 V-tolerant I/Os
• Up to 15 communication interfaces
– Up to 3 × I2C interfaces (SMBus/PMBus)
– Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control)
– Up to 3 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock
– 2 × CAN interfaces (2.0B Active)
– SDIO interface
• Advanced connectivity
– USB 2.0 full-speed device/host/OTG controller with on-chip PHY
– USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
– 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII
• 8- to 14-bit parallel camera interface up to 54 Mbytes/s
• Cryptographic acceleration: hardware acceleration for AES 128, 192, 256, Triple DES, HASH (MD5, SHA-1), and HMAC
• True random number generator
• CRC calculation unit
• 96-bit unique ID
• RTC: subsecond accuracy, hardware calendar
STM32F41x系列產品應用領域:
These features make the STM32F415xx and STM32F417xx microcontroller family suitable for a wide range of applications:
• Motor drive and application control
• Medical equipment
• Industrial applications: PLC, inverters, circuit breakers
• Printers, and scanners
• Alarm systems, video intercom, and HVAC
• Home audio appliances
圖1. STM32F41x框圖
STM32F41x系列演示板STEVAL-IHM039V1
The STEVAL-IHM039V1 demonstration board is designed as a dual motor field-oriented control (FOC) development platform for STMicroelectronics’ ARM Cortex™-M4 32-bit corebased STM32F415ZG microcontroller with up to 168 MHz of clock frequency and FPU support. The board features full-speed USB 2.0 and CAN 2.0 A/B compliant interfaces; 1I2S/I2C channel, 1 USART channel and 1 insulate USART through USB to serial bridge, 2 DAC channels, internal 192+4KB SRAM and 1 MB Flash memory, and JTAG and SWD debugging support. The board is designed to implement multiple motor controls and offers an advanced user I/O interface (LCD QVGA display and joystick key). Extension headers make it easy to connect a daughterboard or wrapping board for specific applications.
With dedicated hardware features, the STEVAL-IHM39V1 board is designed to help developers to evaluate the device and develop their own applications.
The STEVAL-IHM39V1 can be used together with the STM32 PMSM single/dual FOC SDK v3.x and two of the possible STMicroelectronics demonstration power boards equipped with MC connector for a complete dual motor control evaluation and development platform.
The demonstration board can be ordered through order code STEVAL-IHM039V1.
圖2. 演示板STEVAL-IHM039V1外形圖
演示板STEVAL-IHM039V1主要特性:
• STMicroelectronics’ ARMTM Cortex-M4 core-based STM32F415ZG microcontroller
• Two full-featured MC connectors for interfacing with any of the possible STMicroelectronics demonstration power boards
• JTAG, SWD and trace debug support
• USB connector for isolated virtual com port
• USB 2.0 full speed connection
• 240 x 320 TFT color LCD
• Joystick with 4-direction control and selector
• 4 LEDs
• Reset plus three user buttons
• Five 5 V power supply sources: 2-way screw connector, power jack, two USB connectors or daughterboard
• Boot from user Flash or system memory
• CAN 2.0 A/B compliant connection
• I2C connection
• RS-232 channel with RTS/CTS handshake support
• Extension connectors for daughterboard or wrapping area board
圖3. 演示板STEVAL-IHM039V1電路圖(1):擴展&I2C_IOS連接器
圖4. 演示板STEVAL-IHM039V1電路圖(2):操縱桿按鈕和LCD
圖5. 演示板STEVAL-IHM039V1電路圖(3):JTAG SWD和跟蹤
圖6. 演示板STEVAL-IHM039V1電路圖(4):MC連接器MAI
圖7. 演示板STEVAL-IHM039V1電路圖(5):MC連接器SUB1
圖8. 演示板STEVAL-IHM039V1電路圖(6):外設(1)
圖9. 演示板STEVAL-IHM039V1電路圖(7):外設(2)
圖10. 演示板STEVAL-IHM039V1電路圖(8):電源(1)
圖11. 演示板STEVAL-IHM039V1電路圖(9):電源(2)
圖12. 演示板STEVAL-IHM039V1電路圖(10):STM32 MC
圖13. 演示板STEVAL-IHM039V1電路圖(11):虛擬COM
演示板STEVAL-IHM039V1材料清單:
 |
| |
|
|
|
|
|
| |
| |
| |
 |
您可能對以下產品感興趣 |
 |
|
 |
| 產品型號 |
功能介紹 |
兼容型號 |
封裝形式 |
工作電壓 |
備注 |
| ACM6755 |
ACM6754是一款三相無刷直流電機驅動芯片，內部集成無感三相無刷電機驅動算法、相電流檢測電流電路、柵極驅動電路以及功率MOS管. 支持最大4.8A的相電流. ACM6754/55 的高集成度以及精簡外圍特別適用于高功率密度、小尺寸、靜音要求高的三相無刷電機驅動器。 |
ACM6763 |
QFN-28 |
4.5V-28V |
三相180˚ 正弦/方波, 無感或者外置霍爾的直流無刷電機驅動器, 180˚ 正弦/方波/開窗正炫可選 |
| ACM6763 |
4.5V-32V、5A三相無刷無感驅動、180˚正弦，集成驅動算法+預驅+MOS |
ACM6755 |
QFN-28 |
4.5V-32V |
三相180˚ 正弦, 無感或單霍爾,車規級無刷電機驅動 |
| ACM6754 |
ACM6754是一款全集成、無需外置傳感器的三相無刷電機驅動IC。內部集成電機控制算法和電流/ 電壓檢測，能夠基于無刷電機旋轉過程中的反電動勢控制電機靜音/ 高效旋轉。 |
ACM6753 |
QFN-24 |
5V-28V |
三相180˚ 正弦/方波, 無感或者外置霍爾的直流無刷電機驅動器 |
| ACM6252 |
ACM6252是一款外置霍爾傳感器的單相無刷電機驅動IC。內部集成電機控制算法和電流檢測，能夠基于霍爾信號控制單相無刷電機靜音/ 高效旋轉。內部集成4顆小于500mΩ的MOS保證1.2A電流輸出的情況下優異的熱性能。 |
APX9230/M8121 |
TSSOP-16/DFN-10 |
3.3V-18V |
正弦波或方波驅動，外置霍爾的12V/1.2A單相無刷直流電機驅動器 |
| ACM6753 |
18V、3A三相無刷無感驅動、180˚正弦，集成驅動算法+預驅+MOS |
ACM6754 |
QFN-24 |
5V-18V |
5-18V無感三相無刷電機驅動器 |
|
| |
|
| |
|
|
