| 當前位置：首頁->方案設計 |
|
| ADuM7223 4A隔離的半橋柵極驅動方案 |
|
|
| 文章來源： 更新時間：2014/8/27 10:51:00 |
在線咨詢： |
| |
ADI公司的ADuM7223是 4A隔離的半橋柵極驅動器,采用ADI公司的iCoupler®技術,提供單獨和隔離的高邊與低邊輸出.和高速CMOS和單片變壓器技術,絕緣器件提供杰出的性能,輸入工作電壓3.0V-5.5V,輸出工作電壓4.5V-18V,工作頻率1MHz,傳輸延遲64ns,主要用在開關電源,隔離的IGBT/MOSFET柵極驅動器和工業逆變器.本文介紹了ADuM7223主要特性,框圖, 評估板EVAL-ADuM7223EBZ主要特性,電路圖,材料清單和PCB設計圖.
The ADuM7223 is a 4.0 A isolated, half-bridge gate driver that employs Analog Devices, Inc., iCoupler® technology to provide independent and isolated high-side and low-side outputs. Combining high speed CMOS and monolithic transformer technology, these isolation components provide outstanding performance characteristics superior to alternatives such as the combination of pulse transformers and non-isolated gate drivers. By integrating the isolator and driver in a single package, propagation delay is a maximum of only 64 ns, and the propagation skew from channel to channel is a maximum of only 12 ns at 12 V. The ADuM7223 provides two independent isolation channels.
The ADuM7223 operates with an input supply ranging from 3.0 V to 5.5 V, providing compatibility with lower voltage systems. The outputs operate in a wide range from 4.5 V to 18 V with three output voltage versions available. The 5 mm × 5 mm, LGA package provides 565 V operating voltage from input to output and 700 V from output to output. In comparison to gate drivers employing high voltage level translation methodologies, this gate driver offers the benefit of true, galvanic isolation between the input and each output. As a result, this gate driver provides reliable control over the switching characteristics of IGBT/MOSFET configurations over a wide range of positive or negative switching voltages.
ADuM7223主要特性:
4.0 A peak output current
Working voltage
High-side or low-side relative to input: 565 V peak
High-side to low-side differential: 700 V peak
High frequency operation: 1 MHz maximum
Precise timing characteristics
64 ns maximum propagation delay
8.5 ns maximum channel-to-channel matching
3.0 V to 5.5 V input voltage
4.5 V to 18 V output drive
UVLO supply at 2.8 V VDD1
A Version UVLO, VDDA and VDDB (VDD2) at 4.1 V
B Version UVLO, VDDA and VDDB at 6.9 V
C Version UVLO, VDDA and VDDB at 10.5 V
CMOS input logic levels
High common-mode transient immunity: >25 kV/μs
High junction temperature operation: 125℃
Default low output
5 mm × 5 mm, 13-terminal LGA
ADuM7223應用:
Switching power supplies
Isolated IGBT/MOSFET gate drives
Industrial inverters
圖1. ADuM7223框圖
評估板EVAL-ADuM7223EBZ
The EVAL-ADuM7223EBZ supports the ADuM7223 4 A, isolated precision half bridge driver. Because the evaluation boards have footprints for insulated gate bipolar transistors (IGBTs) and metal oxide semiconductor field effect transistors (MOSFETs) in TO-252 packages, the ADuM7223 can be evaluated with many different power devices. The evaluation boards also allow the high-side supply to be bootstrapped to the low-side supply.
The ADuM7223A model represents a superset of the ADuM7223 models because it has the lowest minimum output voltage (4.5 V). The evaluation board comes populated with the lowest undervoltage lockout (UVLO) value (Grade A).
Complete information about the ADuM7223 is available in the ADuM7223 data sheet, which should be consulted in conjunction with this user guide when using the evaluation board.
評估板EVAL-ADuM7223EBZ主要特性:
4 A peak output current
High frequency operation: 1 MHz maximum
CMOS input logic levels
4.5 V to 18 V output drive
Supports TO-252 IGBT/MOSFETs
Bootstrap option
圖2. 評估板EVAL-ADuM7223EBZ外形圖
圖3. 評估板EVAL-ADuM7223EBZ半橋驅動器電路圖
圖4. 評估板EVAL-ADuM7223EBZ PCB設計圖:頂層
圖5. 評估板EVAL-ADuM7223EBZ PCB設計圖:底層
評估板EVAL-ADuM7223EBZ材料清單:
 |
| |
|
|
|
|
|
| |
|
| |
|
|
