當前位置:首頁->方案設計 |
|
FNA21012A SPM工業馬達驅動參考設計 |
|
|
文章來源: 更新時間:2014/12/4 11:06:00 |
在線咨詢: |
|
Fairchild公司的FNA21012A是Motion SPM® 2模塊,提供用于交流馬達,BLDC和永磁馬達(PMSM)的全特性高性能的1200V/10A三相反相輸出級,包括內置IGBT的柵極驅動器,多種模塊保護特性如欠壓鎖住,過流關斷,溫度檢測和故障報告.主要用于工業AC 400V級的工業馬達運動控制.本文介紹了FNA21012A主要特性, 框圖, 開關測試電路以及FNA21012A 1200V參考設計主要特性, 空調器室外風扇馬達驅動框圖, 三相逆變器參考設計和PCB布局圖.
The FNA21012A is a Motion SPM® 2 module providing a fully-featured, high-performance inverter output stage for AC induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features: under-voltage lockouts, over-current shutdown, temperature sensing, and fault reporting. The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logic level gate inputs to high-voltage, high-current drive signals to properly drive the module’s internal IGBTs.
Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms.
FNA21012A主要特性:
• UL Certified No. E209204 (UL1557)
• 1200 V - 10 A 3-Phase IGBT Inverter, Including Control ICs for Gate Drive and Protections
• Low-Loss, Short-Circuit-Rated IGBTs
• Very Low Thermal Resistance Using Al2O3 DBC Substrate
• Built-In Bootstrap Diodes and Dedicated Vs Pins Simplify PCB Layout
• Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing
• Single-Grounded Power Supply Supported
• Built-In NTC Thermistor for Temperature Monitoring and Management
• Adjustable Over-Current Protection via Integrated Sense-IGBTs
• Isolation Rating of 2500 Vrms / 1 min.
FNA21012A應用:
• Motion Control - Industrial Motor (AC 400 V Class)

圖1. FNA21012A內部框圖

圖2. FNA21012A開關測試電路
FNA21012A 1200V參考設計
This reference design supports design of 1200 V Motion SPM® 2 series. It should be used in conjunction with the 1200 V Motion SPM 2 series datasheets as well as Fairchild’s application notes.
FNA21012A 1200V參考設計主要特性:
1200 V 10 A / 25 A / 35 A 3-Phase IGBT Inverter Including Control ICs for Gate Driving and Protections
Very Low Thermal Resistance by Adopting DBC Substrate
Easy PCB Layout due to Built-in Bootstrap Diodes
Divided Negative DC-Link Terminals for Inverter Three-Leg Current Sensing
Single-Grounded Power Supply due to Built-in HVICs and Bootstrap Operations
Built-in Thermistor for Temperature Monitoring
Isolation Rating of 2500 VRMS/min.

圖3.空調器室外風扇馬達驅動框圖(直接耦合)

圖4.三相逆變器參考設計(直接耦合)

圖5. FNA21012A設計PCB布局圖(直接耦合) |
|
|
|
|
|
|
|
|
|